|
ratz@laphish2:~$ telnet 80.237.155.99 81
Trying 80.237.155.99...
Connected to 80.237.155.99.
Escape character is '^]'.
GET /ldirectord.html HTTP/1.0
Hehe in ldirectord.cf I specified --ldirector.html - thsi one works all
the time :-)
Darn, my apologies for this oversight. Must be the medications fighting
my cold :). You are of course correct.
Important: you need to be able to connect to your RS from your
director and be able to perform the defined health check. This is
currently not possible (although I couldn't test from your director).
If this is not possible, ldirectord will either take your RS out or
(maybe?) quiesce it.
Sure - the debugging showed that thsi was ok all the time - see above.
What happens if you disable the check method in your ldirectord
configuration?
Ok, so then this is definitely weird. At first sight it looked to me
as if ldirectord has missing "set variable undefined" somewhere in the
code. I remember, when I implemented something similar to ldirectord
years ago, I was bit by this when writing the configuration parser.
Will check ...
Is your ldirectord started via heartbeat?
Yes.
If it helps - here is the most recent log output:
[Thu Feb 15 10:30:17 2007|ldirectord] Linux Director Daemon terminated
on signal: TERM
[Thu Feb 15 10:31:48 2007|ldirectord] Starting Linux Director v1.77.2.6
as daemon
[Thu Feb 15 10:31:48 2007|ldirectord] Added virtual server:
80.237.183.170:82
[Thu Feb 15 10:31:48 2007|ldirectord] Added fallback server:
67.19.109.2:81 ( x 80.237.183.170:82) (Weight set to 1)
[Thu Feb 15 10:31:48 2007|ldirectord] Quiescent real server:
80.237.155.99:82 mapped from 80.237.155.99:81 ( x 80.237.183.170:82)
(Weight set to 0)
[Thu Feb 15 10:31:48 2007|ldirectord] Added real server:
80.237.155.99:81 ( x 80.237.183.170:82) (Weight set to 1000)
[Thu Feb 15 10:31:48 2007|ldirectord] Deleted fallback server:
67.19.109.2:81 ( x 80.237.183.170:82)
I don't have time right now to have a deeper look, but could you please
compare your version of ldirectord with the following (or send me your
version in private), and if this one is newer, try it on your setup?
http://www.vergenet.net/linux/ldirectord/download/ldirectord.1.186
Best regards,
Roberto Nibali, ratz
--
echo
'[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc
|
