|
On Fri, 31 Aug 2007, Joseph Mack NA3T wrote:
> On Fri, 31 Aug 2007, Ducassou Laurent-Pierre wrote:
>
>> Hi all,
>>
>> I have solved the problem with the following commands :
>>
>> echo 1 > /proc/sys/net/ipv4/all/arp_ignore
>> echo 2 > /proc/sys/net/ipv4/all/arp_announce
>> echo 1 > /proc/sys/net/ipv4/tunl0/arp_ignore
>> echo 2 > /proc/sys/net/ipv4/tunl0/atp_announce
>> echo 0 > /proc/sys/net/ipv4/tunl0/rp_filter
>
> I assume this is on the realserver. If so, then the router
> for the realservers is in the same network as the VIP on the
> director, in which case you could use LVS-DR.
sorry I didn't explain this. The main point is that there's
no arp problem with LVS-Tun, when the realservers are on a
different network to the director's VIP (ie the VIP on the
director and the VIPs on the realsevers are behind diffrent
routers).
Joe
>
> Joe
>
>
>>
>> LVS:TUN works now :)
>>
>> Thank you !!!
>>
>> No virus found in this outgoing message.
>> Checked by AVG Free Edition.
>> Version: 7.5.484 / Virus Database: 269.12.12/979 - Release Date: 29/08/2007
>> 20:21
>>
>>
>>
>> _______________________________________________
>> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
>> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
>> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
>>
>
>
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
|
