LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

Re: [lvs-users] No Application data in LVS

To: "LinuxVirtualServer.org users mailing list." <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: [lvs-users] No Application data in LVS
From: Graeme Fowler <graeme@xxxxxxxxxxx>
Date: Mon, 26 Nov 2007 11:01:20 +0000
On Mon, 2007-11-26 at 11:49 +0100, Michael Schwartzkopff wrote:
> TCP Syn, Syn ACK, ACK (3-way handshake) works. So NAT shold work in my 
> environment.

You should see the following at the client - CIP is client IP, VIP is
virtual IP, DIP is director IP, RIP is realserver IP:

CIP -> VIP  SYN
VIP -> CIP  SYN/ACK
CIP -> VIP  ACK

then several packets transferring data - the request and the response.
It appears your problem stems from the fact that the client is seeing a
response from the RIP, not the VIP. I'm surmising a bit at this point
because I can't see, nor have you described, your network layout.

The client should normally see *nothing* from the DIP or RIP. If it
does, it's not working properly.

What do you see on the director and the realserver at the same time? Is
the realserver responding directly to the client? Come to that, is the
realserver's default gw set to be the director?

Graeme



<Prev in Thread] Current Thread [Next in Thread>