|
On Sun, 2 Dec 2007, NIels Heetesonne wrote:
> Hello,
>
> I'm trying to setup a LVS-DR envirioment but am not yet succesfull.
>
> I've got the network setup as descibed below:
>
ascii art survives better if < 60chars or so
>
> 192.168.2.238 | 192.168.2.239 | virtual ip:
> 192.168.2.240/192.168.2.241/192.168.2.242
> -------------- --------------
> | | | |
> | lvs-01 | | lvs-02 |
> | | | |
> -------------- --------------
> 10.0.0.1 | 10.0.0.2 | virtual ip: 10.0.0.254
there should be no VIP on the RIP network. What is
VIP=10.0.0.254 about?
> -------------------------------------------------------------
> | | | |
> 10.0.1.1 | 10.0.1.2 | 10.0.2.1 | 10.0.2.2 |
> -------------- -------------- -------------- --------------
> | | | | | | | |
> | www-01 | | www-02 | | mail-01 | | mail-02 |
> | | | | | | | |
> -------------- -------------- -------------- --------------
>
> I can't seem to find an howto as to accomplish this.
the mini-HOWTO should point you in the right direction. Have
you set up the LVS-DR example there?
> The howto's I've found so far all asume that the lvs and
> realserver are one,
one what?
> or the lvs and realserver are on the
> same subnet.
the RIPs and DIP have to be on the same subnet.
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
|
