|
Julien Cornuwel wrote:
> 2008/9/29 Julien Cornuwel <cornuwel@xxxxxxxxx>
>
>> Malcolm Turnbull a écrit :
>>
>> I only have 1 interface and already tried :
>> net.ipv4.conf.all.arp_ignore=1
>> net.ipv4.conf.eth0.arp_ignore=1
>> net.ipv4.conf.all.arp_announce=2
>> net.ipv4.conf.eth0.arp_announce=2
>>
> OK, so I definitely have an ARP problem, with the above configuration.
>
> On the first request, that works, I have an ESTABLISHED line.
> But after a few seconds, I get dozens of SYN_RECV.
A tcpdump should tell you where the problem is.
I missed the beginning of this thread so I'm just throwing this out
there. When I played with LVS on the same network as the RIPs, I had
send_redirects=0, otherwise the LVS would mislead the real servers that
they should send their packets to the router instead (where they'd get
dropped).
Oh, and I also had arp_ignore=2 though not sure if that made a difference.
--
Laurentiu Badea
|
