Re: [lvs-users] LVS/Nat and source natting

[Joseph Mack NA3T <jmack@xxxxxxxx>]

On Thu, 27 Nov 2008, luca boncompagni wrote:

> Hi all,
>
> I need to balance a cluster of servers inside the same subnet as below:

read the one-network LVS-NAT section if you want to use 
LVS-NAT.


> and i try with:
>
> iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 10.3.136.24

for standard LVS installations, don't use iptables rules 
till after you have it working.

> but SNAT is not working.

I don't know what this means

Joe

-- 
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!