[lvs-users] Struggling understanding 443 actions.

[Brent Clark <brentgclarklist@xxxxxxxxx>]

Hiya

Ive been struggling to understand this. With the addition of port 443, I see it 
running with a weight limit of 0. The other question I would like to ask is, 
why for port 80, does the localhost not display, but 443 it does?

web01:/etc/ha.d# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
   -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  x.x.x.x:80 rr
   -> x.x.x.x:80                Route   1      0          0
   -> x.x.x.x:80                Local   1      0          0
TCP  x.x.x.x:443 rr
   -> x.x.x.x:443               Route   0      0          0
   -> x.x.x.x:443               Local   0      0          0
   -> 127.0.0.1:443                Local   1      0          0
web01:/etc/ha.d#

Would anyone please help me understand this.

Kind Regards
Brent Clark

------------------------------------- Config -----------------------------

checktimeout=10
checkinterval=2
autoreload=no
logfile="local0"
quiescent=yes
virtual=x.x.x.x:80
         real=x.x.x.x:80 gate
         real=x.x.x.x:80 gate
         fallback=127.0.0.1:80
         service=http
         request="ldirector.html"
         receive="Test Page"
         scheduler=rr
         protocol=tcp
         checktype=negotiate
virtual=x.x.x.x:443
         real=x.x.x.x:443 gate
         real=x.x.x.x:443 gate
         fallback=127.0.0.1:443
         service=https
         request="ldirector.html"
         receive="Test Page"
         scheduler=rr
         protocol=tcp
         checktype=negotiate

_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/

LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users