|
On Wed, 14 Oct 2009, Vincent Young wrote:
>>> eth0:0 Link encap:Ethernet HWaddr FE:FD:61:6B:82:44
>>> inet addr:192.168.134.109 Bcast:192.168.255.255 Mask:
>>> 255.255.128.0
>>
>> you have a /23 network?
>
>
> This is the settings I was given to add a private ip to eth0:0
well you can telnet to it, so I guess it's OK
>>> tunl0 Link encap:IPIP Tunnel HWaddr
>>> inet addr:97.107.133.234 Mask:255.255.255.255
>>
>> what happened to BROADCAST? it should be 97.107.133.234
>>
> This is on the realhost.
> I bring up the tunl0 on realhost using:
> # /sbin/ifconfig tunl0 97.107.133.234 netmask 255.255.255.255
> broadcast 97.107.133.234
> it doesnt show me anything about broadcast. same thing if
> i use lo:0 as well.
Hmm mine doesn't either. How about that? (I wonder when that
changed, or maybe it's always been that way and I've never
noticed.)
It looks like you've done all the right things. I assume
you're going to have the same problem with LVS-DR if adding
the VIP to lo:0 kills the network.
I would assume there's something wrong with Xen at this
stage. I don't know how many people are using virtualised
servers - there's got to be a few and we aren't hearing
anyone having problems. The only one so far is
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.virtualised_realservers.html#tcp_checksum_bug
I'm stumped sorry.
Joe
>
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
