[lvs-users] LVS-DR on default gateway

To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Subject: [lvs-users] LVS-DR on default gateway
From: "Dennis J." <dennisml@xxxxxxxxxxxx>
Date: Wed, 20 Jan 2010 14:08:32 +0100
I'm trying to set up a couple of realservers behind a 
gateway/router/firewall and would like to put the LVS-DR config on that 
machine too. In another setup I'm already running LVS-DR but there the 
director is not sitting between the client and the realservers.
I've read the documentation and googled around and found that the 
director/gateway combination only works with patches applied and some 
additional non-standard configuration steps.
What I'm wondering is if there is an easier way to accomplish this now? The 
references I found on the web go all the way back to 2001 and talk about 
2.2 and 2.4 kernels so I'm not sure if the patches/hacks to make this work 
are still valid or if there is an easier way to accomplish this nowadays?


Please read the documentation before posting - it's available at: mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to

<Prev in Thread] Current Thread [Next in Thread>