|
I have setup numerous lvs instances in the past without issue. I have
configured a basic LVS DR that works fine balancing port 80 but will not
work for port 53. Exact same setup for both ports including the same
realservers. Both HTTP and DNS function if I access the realservers
directly and I can ping and telnet (both ports) the realservers from the
director. 80 works but 53 just keeps printing:
nanny[2034]: READ to XXX.XXX.XXX.XXX:53 timed out
in /var/log/messages.
Is there something special about port 53 that could be getting in my way
here?
I am using piranha and since nanny is printing the error I will most
likely need to try their list but I thought I would check here to see if
there was something fundamental about LVS that I needed to know before I
bang my head against this any longer.
Thanks in advance.
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
| 