|
I'm not sure what nanny is, or how it interacts with DNS (note that DNS
mostly uses udp/53, not tcp/53). I've been running LVS for DNS for years
without issues.
Did you try using ldirectord instead of piranha?
David
On 3/15/12 5:41 PM, Matthew Smart wrote:
> I have setup numerous lvs instances in the past without issue. I have
> configured a basic LVS DR that works fine balancing port 80 but will not
> work for port 53. Exact same setup for both ports including the same
> realservers. Both HTTP and DNS function if I access the realservers
> directly and I can ping and telnet (both ports) the realservers from the
> director. 80 works but 53 just keeps printing:
>
> nanny[2034]: READ to XXX.XXX.XXX.XXX:53 timed out
>
> in /var/log/messages.
>
> Is there something special about port 53 that could be getting in my way
> here?
>
> I am using piranha and since nanny is printing the error I will most
> likely need to try their list but I thought I would check here to see if
> there was something fundamental about LVS that I needed to know before I
> bang my head against this any longer.
>
> Thanks in advance.
> _______________________________________________
> Please read the documentation before posting - it's available at:
> http://www.linuxvirtualserver.org/
>
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
