|
Joseph Mack wrote:
>
> "Phil Z." wrote:
> >
> > Success!
>
> congratulations. You've got a realserver to be a RealServer. Is this the
> thing that costs $2995 with RedHat? (no wonder I didn't know what it was)
Nope. This is the free one that supports 25 session per server ;-)
>
> > Here is what has to be done:
> > 1. The real real audio/video daemon must be configured to listen/respond
> > to _BOTH_ the VIP and its real ip ( see Configure->General Setup->IP
> > Binding on the RealAdministrator web page ).
>
> er OK. The demon listening on the RIP never hears from anyone though ;-\
You actually need the RIP to respond so that you can manage/monitor it.
>
> > 2. Both the 7070 and 554 ( PNAPort and RTSPPort respectively ) must be
> > redirected. You might have to do more ports for other features of the
> > real audio/video daemon.
>
> squid has 2 ports too. I forget what the 2nd one is for but it doesn't get
> used
> unless there's some error condition, so you don't initially realise that you
> need it
> (will be in the next HOWTO.)
>
> What's on each of 7070 and 554? Is one video and the other audio?
> What does PNAPort and RTSPPort stand for?
> What happens if the client gets 7070 from one realserver and 554 from another?
> Did you have to link the 2 services with persistent connection?
Hmmm... I'll have to try that
>
> > Thanks for the tip Joe!
>
> delighted it worked.
> With the realservers tunnelling, are they geographically distributed?
I haven't tried doing that yet but I will report back when I do.
>
> Is it working well enough to put in the HOWTO?
> Joe
Not just yet. Let me kick it around a bit.
>
> --
> Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
> contractor to the National Environmental Supercomputer Center,
> mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
