|
With the 2.2.15pre19 only one reject (non fatal) and it work good
whit my eepro100 stuff.
emman
----- Original Message -----
From: "Julian Anastasov" <uli@xxxxxxxxxxxxxxxxxxxxxx>
To: "DongHyun Kim" <ryan@xxxxxxxxxxxxxxxxx>
Cc: <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, May 04, 2000 1:53 AM
Subject: Re: LVS 0.9.12 (+Intel e100 driver) Timed Out Error
>
> Hello,
>
> On Thu, 4 May 2000, DongHyun Kim wrote:
>
> > Hi,
> >
> > I'm using lvs-0.9.12 with kernel-2.2.14 + Intel's E100 NIC driver.
> > (LVS settings are DirectoRouting+RoundRobin)
> > I made benchmark it with "http_load" which generates Web-Requests.
> >
> > When I tested it with eepro100.o NIC module, LVS showed a good
performance.
> > But With Intel E100 driver, It showed so many error messages on
> > both director(dispather) and real-servers
>
> You probably have problems with the eth drivers. Can you
> try with another NIC or with 2.2.15? There are many changes after
> 2.2.14 in eepro100.c!
>
> If you use ipvs-0.9.12-2.2.14.tar.gz with 2.2.15 there is
> one rejection which is not fatal.
>
> >
> > error messages are
> > eth0: Transmit timed out: status 0050 0000 at 1475/1489 command
000ca000
> > eth0: Trying to restart Transmitter...
> > eth0: Transmit timed out: status 0050 0000 at 1545/1559 command
000ca000
> > eth0: Trying to restart Transmitter...
> > eth0: Transmit timed out: status 0050 0000 at 1651/1665 command
000ca000
> > eth0: Trying to restart Transmitter...
> > eth0: Transmit timed out: status 0050 0000 at 1693/1707 command
000ca000
> > eth0: Trying to restart Transmitter...
> > ....
> >
> > and "http_load" clients that send web-request has zero-size reply
> > or time out
> > (maybe don't get reply)
> >
> > What's the solution to this problem?
>
> 2.2.15! Try many variants. There is a software problem. There are
> very little changes in LVS after 0.9.11.
>
> > Do I set my machine incorrectly?
>
> I don't see your settings but the problem can't be raised
> from bad settings :)
>
> >
> > PS) When I tested it with LVS-0.9.11, there is no problem. :-(
>
> With the Intel E100 driver or with the 2.2.14 driver?
>
>
> Regards
>
> --
> Julian Anastasov <uli@xxxxxxxxxxxxxxxxxxxxxx>
>
>
>
|
