LVS
lvs-users
Google
 
Web LinuxVirtualServer.org

Re: NAT routing not working

To: "Bruno L. F. Cabral" <bruno@xxxxxxxxxxxxxxx>
Subject: Re: NAT routing not working
Cc: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
From: Joseph Mack <mack.joseph@xxxxxxx>
Date: Wed, 20 Sep 2000 13:00:13 -0400
"Bruno L. F. Cabral" wrote:

> I read about piranha and LVS and decided to try the later, based
> on the instructions at http://www.linuxvirtualserver.org/VS-NAT.html
> but couldn't get success, so I'm writing in search of some aid


 
> (in case it matters, the LVS-NAT router has two network cards and
> it's connected to the same test HUB than the real server and the
> test client -- lack of more HUBs to split the test networks ;~) )

read the HOWTO. You cannot have any direct connection from the real-server
to the outside world. The only connection is through the director
(and its masq tables). The director is the default route for the real-server. 

Joe

-- 
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center, 
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA


<Prev in Thread] Current Thread [Next in Thread>