|
Dayton Turner wrote:
> While hitting my cluser with 15 threads at once, i
> only ever see the activeconn value at no higher than 3, and the
> inactiveconn number climbs.
assuming you're getting the expected throughput...
This is pretty much what I see too. My explanation for it is that once
the hit has been served, and the connection closed down, the connection goes
into the inactive state. There it takes 2mins (approx, forget exact
time) to time out. If it takes 0.1 sec to handle the hit,
then only 0.1/120 =0.1% of your connections are going to be
active at any time.
ipvsadm used to show accumulated connections back in the stone age of
LVS, but it hasn't done this for a while (although it might be useful to have
back)
> Is there a reason LVS realservers only want
> to accept 3 connections at once,
the connections are being handled so fast, that they've gone before
you look at them :-)
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
