|
er, no I don't. Under some condition the LVS functions correctly from
the remote machine and under some other condition, which seems to have
something to do with ldirectord, it doesn't work. Can you explain more?
Joe
No, unfortunately request to LVS services from the machine outside the
gateway does not work under any condition.
I had been able to run requests to LVS services inside the gateway
(using the information provided in the howto for LVS-NAT in one network).
- Inside the gateway:
gateway# telnet director 80 -> works (with director icmp redirects off,
realserver route modified in the way the howto says)
gateway# telnet director 80 -> does not work (with director icmp
redirects on, realserver routes without any modification)
- Outside the gateway:
doctor# telnet director 80 -> does not works in any case (icmp on,
off... on director...)
- But, now outside the gateway too:
On director put ldirectord service off and raise apache -> so LVS its
unused.
doctor# telnet director 80 -> Ok i have response.
Thanks for your attention.
--
--------------------------------------------------------
Carlos J. Ramos Genasys II Spain, S.A.U.
Administrador de Sistemas Ventura de la Vega 5
Tel:+34-91-3649100 ext 170 28014 Madrid
Fax:+34-91-3649119
Spain
Email: cjramos@xxxxxxxxxx
--------------------------------------------------------
|
