Re: lvs-nat (2 NIC set up) only accessible from clients on the same subnet as the director.

[Ronny Aasen <list@xxxxxxxxxxxxxx>]

On Tue, 2002-06-11 at 13:04, Arshad Khan wrote:
> I found out that my lvs-nat (2 nic set-up) that I set up is only accessible 
> from clients that are one the same subnet that the director is on. It works 
> fine from the same subnet but i want it to be accessible from anywhere. I am 
> using redhat 6.2 and 2.2.19 kernel.
> Anyone know why this is happening or could it be another issue related to the 
> traffic from the subnet director machine
> Thanks in advance.
> 
> Arshad


You have a default gateway on you'r directors ? 


eg
# route       
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
192.168.1.0     *               255.255.255.0   U     0      0        0
eth0
127.0.0.0       *               255.0.0.0       U     0      0        0
lo
default         192.168.1.1     0.0.0.0         UG    0      0        0
eth0




Ronny Aasen