|
Thanks Ronny,
There was a blatant mistake in what I put as default gateway on the
director. Its all working now.
Cheers
Arshad
----- Original Message -----
From: "Ronny Aasen" <list@xxxxxxxxxxxxxx>
To: "lvs-users" <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Tuesday, June 11, 2002 1:08 PM
Subject: Re: lvs-nat (2 NIC set up) only accessible from clients on the
samesubnet as the director.
> On Tue, 2002-06-11 at 13:04, Arshad Khan wrote:
> > I found out that my lvs-nat (2 nic set-up) that I set up is only
accessible from clients that are one the same subnet that the director is
on. It works fine from the same subnet but i want it to be accessible from
anywhere. I am using redhat 6.2 and 2.2.19 kernel.
> > Anyone know why this is happening or could it be another issue related
to the traffic from the subnet director machine
> > Thanks in advance.
> >
> > Arshad
>
>
> You have a default gateway on you'r directors ?
>
>
> eg
> # route
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 192.168.1.0 * 255.255.255.0 U 0 0 0
> eth0
> 127.0.0.0 * 255.0.0.0 U 0 0 0
> lo
> default 192.168.1.1 0.0.0.0 UG 0 0 0
> eth0
>
>
>
>
> Ronny Aasen
>
>
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
>
|
