|
We are running an LVS box at a remote data centre.
Unfortunately, the ISP uses a standard block of single addresses for the
machines and additional IP addresses are in an external block that get
forwarded as needed.
The IP of the director is x.y.254.15/255.255.255.169
The VIP is x.y.237.234/255.255.255.255
The DIP works fine. The VIP does nothing.
When I do an ifconfig, the VIP is never listed.
If I put the VIP to x.y.254.10 it works perfectly but the ISP will not let me
have that address.
I have manually created an ifcfg-eth0:1 to set-up the x.y.237.234 and this
works but only as another DIP not as a VIP. I have tried to use firewall marks
to extract the packets from this but no luck there either.
Has anyone got any ideas on how to approach this problem?
Regards,
Chris Paul
Berkeley Alexander
Temple House, 25-26 High Street, Lewes, East Sussex, BN7 2SD
Tel 01273 477784, Fax 01273 478994
www.baonline.co.uk
PLEASE NOTE:
The information in this e-mail is confidential and may be legally privileged.
It may not represent the views of Berkeley Alexander. It is intended solely for
the addressees. Access to this e-mail by anyone else is unauthorised. If you
are not the intended recipient, any disclosure, copying, distribution or any
action taken or omitted to be taken in reliance on it, is prohibited and may be
unlawful. Any unauthorised recipient should advise the sender immediately of
the error in transmission.
|
