|
Hi
> IP Virtual Server version 1.0.9 (size=65536)
> Prot LocalAddress:Port Scheduler Flags
> -> RemoteAddress:Port Forward Weight ActiveConn InActConn
> TCP 192.168.1.45:http rr
> -> 192.168.1.41:http Route 1 0 0
> -> 192.168.1.42:http Route 1 0 1
> -> 192.168.1.40:http Route 1 0 0
As you should be able to spot, your 192.168.1.42 RS does have count 1 in
the InActConn. Which means this RS has just successfully served a
potential customer/client of your site.
The reason why you didn't see it in the ActiveConn column is that the
time interval between that specific connection establishment and its
termination is very small. And it is small because either you have a
fast uplink or a webpage with static content or both.
Of course if you call ipvsadm 20 seconds later, the above doesn't apply
anymore as most replies are done withing 20 seconds even if the page is
dynamic.
If you want to see something, you should invoke ipvsadm with watch, like so:
watch -n 1 'ipvsadm -Ln'
or if you want it 'realtime' (warning, eats a lot of CPU time):
watch -n -1 'ipvsadm -Ln'
Then have someone connect or wait until someone connects and you'll see
a positive integer in the ActiveConn column. This should render you even
more happy then ;).
Best regards,
Roberto Nibali, ratz
--
echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq'|dc
|
