|
Hello,
It is me again. Still fighting this battle. ( I am pretty sure it is
something I have done setting up my network and not LVS, but I hope someone
can see what I have done incorrectly)
I did not included all the past responses since it would have been huge
BTW, I am a programmer but since I own my own lil company I am forced to be
a sysadmin/network guy. So be kind if I say something stupid.
Thanks for any help
Here is the readers digest version on the problem
After an amount of time(usually over night), the director can not longer get
to the outside world.
(Config stuff at the bottom)
When the director boots , everything works just fine. After a while I can
not longer get to the outside world(not entirely true more on that in a
minute) I notice the problem when I do a
ipvsadm --list ( it takes about 40 seconds to come back )
If I do a ipvsadm --list -n it comes back immediately.
Here is where it gets a little strange(at least to me)
I can ping some boxes on our network(with their public ips)
Before that here is some config info
============================================================================
===========
eth0 Link encap:Ethernet HWaddr 00:08:54:D0:9E:06
inet addr:192.168.0.205 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:52798 errors:0 dropped:0 overruns:0 frame:0
TX packets:52953 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:6627836 (6.3 Mb) TX bytes:0 (0.0 b)
Interrupt:10 Base address:0x800
eth1 Link encap:Ethernet HWaddr 00:01:02:E8:65:FF
inet addr:66.208.187.25 Bcast:66.208.187.127
Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22518 errors:0 dropped:0 overruns:0 frame:0
TX packets:2082 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1811056 (1.7 Mb) TX bytes:222715 (217.4 Kb)
Interrupt:9 Base address:0x1400
eth1:0 Link encap:Ethernet HWaddr 00:01:02:E8:65:FF
inet addr:66.208.187.27 Bcast:66.208.187.27 Mask:255.255.255.255
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22518 errors:0 dropped:0 overruns:0 frame:0
TX packets:2082 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1811056 (1.7 Mb) TX bytes:222715 (217.4 Kb)
Interrupt:9 Base address:0x1400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:588 (588.0 b) TX bytes:588 (588.0 b)
============================================================================
===========
Ie. Ping 66.208.187.21 (on of my webservers on a separate box - works fine)
Ping 66.208.187.126 (which is the gateway) works find
Ping 66.208.187.129 (one of the name servers ) Fails
Ping 66.208.187.133 (a web server on another box ) Fails
Ping anywhere outside world fails
============================================================================
===========
One addition I did yesterday was from
http://www.linuxvirtualserver.org/VS-DRouting.html
Put in the arp workaround
echo 1 > /proc/sys/net/ipv4/conf/eth1/hidden
echo 1 > /proc/sys/net/ipv4/all/hidden
Here is my ldirectord.cf
# Global Directives
checktimeout=3
checkinterval=10
fallback=127.0.0.1:80
autoreload=yes
logfile="/var/log/ldirectord.log"
#logfile="local0"
quiescent=yes
#
virtual=66.208.187.27:80
real=192.168.0.203:80 gate
real=192.168.0.204:80 gate
fallback=127.0.0.1:80 gate
service=http
request="ldirectordping.html"
receive="Test Page"
scheduler=wlc
persistent=1800
netmask=255.255.255.0
protocol=tcp
#SSL part
virtual=66.208.187.27:443
real=192.168.0.203:443 gate
fallback=127.0.0.1:80 gate
service=https
request="ldirectordping.html"
receive="Test Page"
scheduler=wlc
persistent=1800
netmask=255.255.255.0
protocol=tcp
|
