|
The output in DR is:
# ipvsadm
IP Virtual Server version 1.2.0 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.0.11:http wlc
-> 192.168.0.12:http Route 1 0 0
-> 192.168.0.13:http Route 1 0 0
Whatever I'd try, the ActiveConn and InActConn is still 0.
>Leo wrote:
>>
>> lvs-users
>> Dear All,
>>
>> My DR still had problem. The kernel in Director is 2.6.4-52 (Suse 9.1).
>> After TCPDump
>> in Realserver and Director, Director got the client's request, but
>> Realserver didn't got any package from Director.
>
>what is the output of `ipvsadm` after attempting to connect from the client
>
>> I think it maybe still the ARP problem. I found a note said after 2.6.4,
>> it need to use
>> such flag:
>>
>> /etc/sysctl.conf
>> net.ipv4.conf.lo.arp_ignore = 1
>> net.ipv4.conf.lo.arp_announce = 2
>> net.ipv4.conf.all.arp_ignore = 1
>> net.ipv4.conf.all.arp_announce = 2
>>
>> But I didn't found /etc/sysctl.conf in my Linux.
>
>it's a RedHat-ism.
>
>echo "1" > /proc/net/ipv4/conf....
>
>etc
>
>> Anyone had config 2.6.4 successfully? Can you please give me your steps
>> after install ipvsadm? I think I make a wrong when I config eth0 and lo:0.
>> I'm newbie, so any suggestion is very welcome.
>
>
>you could use the instructions in the mini-HOWTO
>
>Joe
>--
>Joseph Mack PhD, High Performance Computing & Scientific Visualization
>LMIT, Supporting the EPA Research Triangle Park, NC 919-541-0007
>Federal Contact - John B. Smith 919-541-1087 - smith.johnb@xxxxxxx
>_______________________________________________
Leo
fds3ssw@xxxxxxxxxxxx
2004-07-28
|
