On Wed, 22 Feb 2006, Bill Omer wrote:
fine. The different netmasks is not a problem then?
Correct. The network configuration was pre-existing.
correct. traceroute from RIP->CIP should not go through the
director.
So that part is configured correctly. That's good. So I guess the
big question is, how am I able to get packets sent to the RIP to be
sent back to the CIP without going through the DIP for the return?
read the packet flow diagram in the HOWTO for LVS-DR. The
reply packet from the realserver is VIP->CIP. It comes from
lo and after looking up the realserver's routing table, the
realserver sends it via the RIP to the default gw, which
can be anything except the director.
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
|