RE: Cluster Help

To: " users mailing list." <lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: RE: Cluster Help
From: Subhankar Sengupta <subhankar_sngpt@xxxxxxxxx>
Date: Fri, 31 Mar 2006 00:58:23 -0800 (PST)
  Both the the server has identical,authkeys and haresourcs. Shall I 
  run #iptables -F??? 

José María Lopez Marzal <jmlopez@xxxxxxxxxxxx> wrote:

Do you have the same configuration (files Heartbeat) in the two Server? Is 
necessary the two server have the same file configuration in the config file of 

You need used different network for the director and real server.

Good luck.

José María López

-----Mensaje original-----
De: Subhankar Sengupta [mailto:subhankar_sngpt@xxxxxxxxx] 
Enviado el: viernes, 31 de marzo de 2006 7:27
Para: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Asunto: Cluster Help

Hello Gurus,
I need to install linux cluster for my lab. I am using HP proliant DL 380 G4 
servers( 2 nodes) it has a shared storage which is connected via external SCSI 
Both the servers has two NIC.
Let me tell you what I have done, I have connected eth0 of server A(Active) with
eth0 of server P(Passive) directly using a cross cable, but I have not assigned 
any IP address to them.
eth1 of Server A and P is connected to a HUB. I have assigned and to them.
Now I have installed Hearbeat software and dependencies. Then I have configured
authkeys, and ha resources.

This is exactly how my haresources file looks like.
----------------------------------- Filesystem::/dev/sda1:/var/ftp/pub::ext3 vsftpd 
Floating IP
At the end I have started heartbeats but I HA is not working, I am using 
Please help me to build this.

(FOSS shall overcome)

Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 

Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates 
starting at 1&cent;/min.

<Prev in Thread] Current Thread [Next in Thread>