|
I am afraid there is no such feature in lvs.
Rumen
On Thu, 2007-11-08 at 17:49 +0100, studentsite@xxxxx wrote:
> Hello everyone,
> I'm trying to create tcp socket migration mechanism. For now on I have
> solution to migrate socket between two "real servers".
> I would like to modify entry in lvs hash table for established
> connection. I would like to change IP address and port number in the
> hash table to avoid switching connection between "real server".
>
> For example:
>
> I have 3 computers:
> - lvs 10.0.0.1 & 200.200.200.1
> - real_srv_1 10.0.0.2
> - real_srv_2 10.0.0.3
>
> Client from Internet connect to 200.200.200.1 and lvs switch this
> connection to real_srv_1 (port 80). For some reason I migrate proces
> and socket from real_srv_1 to real_srv_2. From now on, this process
> running on 10.0.0.3 and port (...for example) 8080. To make it still
> runnng I have to redirect packets incoming from lvs to real_srv_2 - so
> I can't to switch off real_srv_1 (for example - I would like to add
> more RAM to real_srv_1).
>
> Here is the question:
> Is there is any solution to change entry in hash table in LVS to
> redirect all packet not to real_srv_1:80 but to real_srv_2:8080?
> Thank You for any reply.
>
> Greets,
> Lukasz Kowalski
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
