|
On Thu, 25 Sep 2008, eneal@xxxxxxxxxxxxxxxxx wrote:
> There is alot of documentation on this. Essentially, I'm running
> keepalived and LVS on a server doing only direct routing. I need to
> check content for sites the server is load balancing, but I can't do
> it on the VIP. I have to do it using a port on the real server IP.
you want to do health checking in an LVS-DR setup?
> I've followed section 7.10 in this document:
>
> http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-DR.html
is this related to health checking?
there's a section on
"Monitoring the service running on the VIP on the realserver
from the director"
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.realserver_failure.html#failover_big_caveat
It's in the section on using Mon to monitor the realservers,
so it's location isn't obvious. Mon was used in the early
days of LVS.
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
|
