|
I already setup my rules in ipvsadm. However, its not connecting to the real
server. Here is the procedure in my VIP
(not real ip address)
ipvsadm -A -t 202.81.26.31:80 -s wlc
ipvsadm -a -t 202.81.26.31:80 -r 202.81.26.40:80 -i -w 1
ipvsadm -a -t 202.81.26.31:80 -r 202.81.26.35:80 -i -w 2
I also enable tcp forwarding "echo 1 > /proc/sys/net/ipv4/ip_forward" just to
be sure it can forward packets.
I'm also sure I can telnet to port 80 both on 202.81.26.40 and 202.81.26.35 but
still I can't telnet using 202.81.26.31
Is there a problem in my sample configuration? Do I need to configure something
on the real server.
I tried to disable selinux and iptables and do again a telnet but it is still
unaccessible to 202.81.26.31.
Here is the result of ipvsadm -L
[root@LVS ~]# ipvsadm -L
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP cor-32.foo.com:http wlc
-> cor-35.foo.com:http Tunnel 2 0 0
-> web.foo.com:http Tunnel 1 0 0
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
