|
On Mon, 03 May 2010 23:42:48 +0200, Michiel van Es <mve@xxxxxxxxxxxxxxxxx>
wrote:
> anyone? :)
Three things:
1. Obviously not.
2. Please - everyone - trim your posts. The list does not need to receive
hundreds of lines of repeatedly multiply-quoted messages when all you're
sending is a single line. It's wasteful, and in the case of bottom or
inline posting makes finding the relevant section of your post very
difficult.
3. I suspect you have the ARP problem as this is a classic symptom in -DR
setups. It would appear that your connections are going directly to the
second realserver rather than the director. Please check the ARP table on
the machine you're using as a client and ensure the MAC address of the VIP
is that of the director.
My advice would be to start all over again, removing all traces of
configuration and making sure you can get connections through the director
to a single host before adding the second.
Graeme
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
