|
Some version of AMD chip may work, some may not.
I had experience with AMD chip was that I had a
computer controlled phone system, I brought AMD
chip (because it was cheap), the phone system did
not working properly. Once I replaced it with an Intel
CPU, everything started working perfectly. They
both suppose to work well, but that just suppose.
At 11:03 AM 9/13/00 -0400, David Rodrigues wrote:
>The processor is an AMD-K6(tm) 3D. I don't know how to turn off
>promiscuous mode. I checked the Ethernet How-to but no help there. Does
>anyone have a clue how to do this?
>
>On Wed, 13 Sep 2000, Joseph Mack wrote:
>
>> David Rodrigues wrote:
>> >
>> > I'm probably grasping at straws, but...
>> > Do you think the fact that the ethernet cards are running in promiscuous
>> > mode would affect anything?
>>
>> don't know. try turning it off
>>
>> I checked my other LVS server (working) and it
>> > does NOT have the ethernet cards in promiscous mode. Does anyone know how
>> > to shut off promiscuous mode? I'm using an onboard EtherExpress Pro 10/100
>> > card. The driver is in the kernel, not modular.
>> >
>> > One other thing. The director box is a Cobalt RaQ 4r.
>>
>> tell us what it is. Strongarm, regular intel?
>> LVS works on alpha OK. Rebel.com has been running LVS
>> on strongarm but mostly on 2.0.x and early 2.2.x
>> kernels. Wensong only has intel,
>> so no other chips get tested until the code gets out
>> to users.
>>
>> Joe
>>
>> --
>> Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
>> contractor to the National Environmental Supercomputer Center,
>> mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
>>
>
>
|
