|
Mehul Choksi wrote:
>
> Many thanks for the reply. I tried turning off the identd (in /etc/services
> and /etc/inetd.conf, then restarted all the servers) on LVS and real
> servers, still no luck. I have one QMAIL and one SENDMAIL as real servers.
> QMAIL takes exactly 25 seconds when connecting thru LVS and sendmail takes
> exactly 30 seconds thru LVS. However both gets connected immediately while
> connecting directly. Yes, the problem is very similar to the one mentioned
> in the FAQ. But unfortunately it doesn't seem to work for me. Any
> suggestions?
>
> Thanks a lot again. I'd greatly appreciate your response.
>
> Regards,
> Mehul.
You need to turn off ident in sendmail also, it has an internal ident
delay in sendmail.cf, set to 30s by default, set it to 0 and this should
fix your problem.
O Timeout.ident=0s
Regards
MIKE
>
> -----Original Message-----
> From: lvs-users-admin@xxxxxxxxxxxxxxxxxxxxxx
> [mailto:lvs-users-admin@xxxxxxxxxxxxxxxxxxxxxx]On Behalf Of Joseph Mack
> Sent: Tuesday, April 17, 2001 6:50 PM
> To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Subject: Re: Delay in establishing the connection
>
> On Tue, 17 Apr 2001, Mehul Choksi wrote:
>
> > Hi, I have installed the Piranha and Ultra Monkey LVS with DR and found to
> > be working fine except it (both of them) takes about 25 to 30 seconds to
> > establish the initial connection.
>
> Assuming by connection you mean between the client and the LVS, try
>
> http://www.linuxvirtualserver.org/Joseph.Mack/HOWTO/LVS-HOWTO-22.html#ss22.3
>
> Joe
>
> --
> Joseph Mack mack@xxxxxxxxxxx
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
