|
Hello!
but in my config eth0 isn't configured for the RIP network... the VIP on
the director is on the eth0:0, the DIP on eth0 and the realservers and
the director are connected using an seperate segment on eth1 together.
and the VIP is on the eth1:0 on the realserver.
i think that the VIP on the realserver is hidden from the arp requests in
this setup.
but i may be wrong... :o) (which seems to be the case, since my setup
doesnt work this way...)
Chris
On Fri, Nov 16, 2001 at 09:08:15AM -0500, Bill Hatter wrote:
> When I was having problems similar to this, I changed the VIP from eth0:0 to
> eth1:110. It seems that it is easier for the server to send the request out
> on the eth1 which is configured for the RIP network
>
> Bill Hatter
>
> -----Original Message-----
> From: lvs-users-admin@xxxxxxxxxxxxxxxxxxxxxx
> [mailto:lvs-users-admin@xxxxxxxxxxxxxxxxxxxxxx]On Behalf Of Christian
> Joelly
> Sent: Friday, November 16, 2001 8:06 AM
> To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Subject: Problems with LVS-DR, one director, one realserver...
>
>
> Hello!
>
> im new to LVS and run into problems... ;-)
>
> kernel 2.4.10 with the lvs patch v0.9.6, no hidden patch
>
> first here is my setup:
>
> VIP: 10.17.160.30
> DIP: 10.17.160.1 (192.168.100.1)
> RIP: 10.17.160.3 (192.168.100.2)
>
> director:
>
> ifconfig:
> eth0 Link encap:Ethernet HWaddr 00:04:76:32:EB:A5
> inet addr:10.17.160.1 Bcast:10.255.255.255 Mask:255.255.0.0
>
> eth0:0 Link encap:Ethernet HWaddr 00:04:76:32:EB:A5
> inet addr:10.17.160.30 Bcast:10.17.160.30 Mask:255.255.255.255
>
> eth1 Link encap:Ethernet HWaddr 00:04:76:90:98:50
> inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
>
> route:
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
> 10.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
> 0.0.0.0 10.17.130.2 0.0.0.0 UG 0 0 0 eth0
>
> ipvsadm:
> IP Virtual Server version 0.9.6 (size=4096)
> Prot LocalAddress:Port Scheduler Flags
> -> RemoteAddress:Port Forward Weight ActiveConn InActConn
> TCP edvlvs1.knapp.intern:www wlc
> -> 192.168.100.2:www Route 1 0 1
>
> ------------
> real server:
>
> ifconfig:
> eth0 Link encap:Ethernet HWaddr 00:01:02:EB:FC:C4
> inet addr:10.17.160.3 Bcast:10.17.255.255 Mask:255.255.0.0
>
> eth1 Link encap:Ethernet HWaddr 00:04:76:8F:14:58
> inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0
>
> eth1:0 Link encap:Ethernet HWaddr 00:04:76:8F:14:58
> inet addr:10.17.160.30 Bcast:10.17.160.160 Mask:255.255.255.255
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
>
> route:
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 10.17.160.30 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
> 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
> 10.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
> 0.0.0.0 10.17.130.2 0.0.0.0 UG 0 0 0 eth0
>
>
> i have setup a virtual service for my vip and tcp:80, wlc on the
> director.
>
> when i make a telnet connection to port 80 on my VIP or let my browser
> point to that address, the request times out ...
>
> i can see the arp requests on my private 192.168.100.x lan, but the
> apache running on the real server doesnt get the request.
> apache bound to the vip with BindAdress, one VirtualHost configured with
> NameVirtualHost. The apache serves the page correct when i use lynx/links
> on the real server...
>
> maybe someone can point me to the right direction ...
>
> thanks, Chris
--
KNAPP Logistics Automation http://www.knapp.com
Ing. Christian Jölly Tel/FAX: (++43) 316 / 495 1926 / 495 394
Günter-Knapp-Straße 5-7 A-8075 Hart bei Graz
pgpmf7RmD4h8L.pgp
Description: PGP signature
|
