|
Thats my doubt. Since I HAVE to use NAT, i don't know how to properly setup
my VIP.
I tried to put the VIP on an alised interface, like having eth0 set as
192.168.0.2 and eth0:0 set as VIP
I tried without setting up the VIP at all, just using the LAN ip and setting
the VIP only at the real server side (tunl0:0)
I have no clues. If you can give me a direction on how to properly setup LVS
TUN when using NAT at the director side, i'm sure i will get it done.
Does LVS works at all when we have NAT running at the director side?
I have 2 lines running NAT on my director, and i want to use 1 of them as my
VIP.
Don't worry about the ppoe thing, thats ok. I just need to know how to
configure LVS to work when we have NAT running at the director side.
Thanks,
Viperman
From: Joseph Mack <mack.joseph@xxxxxxx>
Reply-To: "LinuxVirtualServer.org users mailing list."
<lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
To: "LinuxVirtualServer.org users mailing list."
<lvs-users@xxxxxxxxxxxxxxxxxxxxxx>
Subject: Re: Problems with LVS TUN and adsl running NAT
Date: Mon, 02 Feb 2004 10:17:22 -0500
"Viperman .::." wrote:
>
> pppoe is OK, its done inside the adsl modem.
> the problem is, on the director, i have to use NAT with the adsl line.
> So in my director, I don't have the VIP set on my eth, i have a LAN
> interface, like 192.168.0.2
> >where is the VIP then?
2nd try
Joe
--
Joseph Mack PhD, High Performance Computing & Scientific Visualization
SAIC, Supporting the EPA Research Triangle Park, NC 919-541-0007
Federal Contact - John B. Smith 919-541-1087 - smith.johnb@xxxxxxx
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
_________________________________________________________________
High-speed users?be more efficient online with the new MSN Premium Internet
Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1
|
