|
In your config you only have 3 instances defined: IN1, EXT1, and EXT2 and
they are all set to state MASTER.
In my working keepalived config, I have one instance defined for each
interface, this totals 4: eth0, and eth1 on the one director and eth0 and
eth1 on the other.
So something like the following is what should work a little better(derived
from my working config):
vrrp_sync_group VG1 {
group {
VI_1
VI_2
VI_3
VI_4
}
}
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 31
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass password
}
virtual_ipaddress {
IPs
}
}
vrrp_instance VI_2 {
state MASTER
interface eth1
virtual_router_id 32
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass password
}
virtual_ipaddress {
IPs
}
}
vrrp_instance VI_3 {
state BACKUP
interface eth0
virtual_router_id 33
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass password
}
virtual_ipaddress {
IPs
}
}
vrrp_instance VI_4 {
state BACKUP
interface eth0
virtual_router_id 34
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass password
}
virtual_ipaddress {
IPs
}
}
Hope this helps!
-Billy Olson
|
