|
Hi,
>
> Hm, thanks for the info :)
>
> I followed the LVS-mini howto
> http://www.austintek.com/LVS/LVS-HOWTO/mini-HOWTO/LVS-mini-HOWTO.html
> and the realservers have been set-up using
>
>
> --------
> echo "0" >/proc/sys/net/ipv4/ip_forward
>
>
> /sbin/ifconfig lo:87 192.168.1.87 broadcast 192.168.1.87 netmask
> 255.255.255.255 up
> /sbin/route add -host 192.168.1.87 dev lo:87
>
> echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
> echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
> --------
I think you have to set arp_announce to 2 as described in
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.arp_problem.html#2.6_arp
echo "2" >/proc/sys/net/ipv4/conf/eth0/arp_announce
HTH
bye
Reiner
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
