|
Reiner Menkens schrieb:
> Hi,
>
>> Hm, thanks for the info :)
>>
>> I followed the LVS-mini howto
>> http://www.austintek.com/LVS/LVS-HOWTO/mini-HOWTO/LVS-mini-HOWTO.html
>> and the realservers have been set-up using
>>
>>
>> --------
>> echo "0" >/proc/sys/net/ipv4/ip_forward
>>
>>
>> /sbin/ifconfig lo:87 192.168.1.87 broadcast 192.168.1.87 netmask
>> 255.255.255.255 up
>> /sbin/route add -host 192.168.1.87 dev lo:87
>>
>> echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
>> echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
>> --------
>>
> I think you have to set arp_announce to 2 as described in
> http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.arp_problem.html#2.6_arp
> echo "2" >/proc/sys/net/ipv4/conf/eth0/arp_announce
> HTH
> bye
> Reiner
>
>
Hello again,
that was exactly what i was missing! arp_ignore has to be set to 1 and
arp_announce to 2, for "all" and "eth0" (even if the VIP is running on
lo:xy). the cluster is up and running some hours now. now problems so far.
thank you!
by
SK
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
