|
Dmitry Dan Brovkovich wrote:
>
> Hi,
>
> I'm in the proccess of setting my first cluster up. I've compiled the
> kernel, 2.4.9 and the ip_vs.o modules is loading fine. The problem starts
> when I try to run the configure script, I get this message:
>
> device eth0 has VIP 10.5.3.130
> Warning:
> You are moving the VIP from one device
> (presumably from a previous LVS installation),
> to a different ethernet device.
> This is difficult to do with ifconfig.
> It's easy to do with iproute2.
> I'll change over to iproute2 sometime.
> Till then you'll have to do the changeover yourself with this script.
>
> 1. Read (with perldoc) the documentation on
> CHANGING VIP BETWEEN ETH DEVICES ON DIRECTOR.
>
> 2. (After editing) run rc.remove_vip
> (it's in the local directory), with the command.
>
> director:/etc/lvs# ./rc.remove_vip
>
> If there are no errors, re-run the rc.lvs file
> and you should not see this notice next time.
>
> NOTE: this node is not setup.
>
> Can you please help me to solve this problem.
What happens when you follow the instructions the configure script
has given you?
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
