|
Matthieu MARC wrote:
>
> I just setting up an LVS cluster with 2 web server (192.168.0.1 &
> 192.168.0.2). My LVS server is 192.168.0.254 on eth0 and 10.11.1.67 on
> eth0:1.
>
> I configure the LVS server with ls_nat.conf, and ./configure ls_nat.conf
> to have the rc.lvs_nat. When I start rc.lvs_nat all is ok. ipvsadm give
> the right table.
setup with telnet first, it's simpler to debug.
can you send the output of ipvsadm for the director
and netstat -rn for both real-servers.
What is "Pb"?
Joe
--
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center,
mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
|
