|
Joseph Mack a écrit :
>
> Matthieu MARC wrote:
> >
> > Joseph Mack a écrit :
> >
> > > Matthieu MARC wrote:
> > > >
> > > > I just setting up an LVS cluster with 2 web server (192.168.0.1 &
> > > > 192.168.0.2). My LVS server is 192.168.0.254 on eth0 and 10.11.1.67 on
> > > > eth0:1.
>
> your data below show that you have the real-servers on 192.168.0.67 and 68,
> youe DIIP on 192.168.0.2 and your VIP 10.11.1.67.
>
> what is the lvs_nat.conf file you used?
>
> The setup below looks reasonable.
>
> What happens if you setup for telnet?
>
> Joe
>
> --
> Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
> contractor to the National Environmental Supercomputer Center,
> mailto:mack.joseph@xxxxxxx ph# 919-541-0007, RTP, NC, USA
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
I have made test with adding a PC Client with send request to the LVS.
It is working well. The Client access to the 2 web server.
But I don't understant why the LVS box doesn't listen on the port 80 !
Thanks
Matthieu MARC
|
