|
I just setting up an LVS cluster with 2 web server (192.168.0.1 &
192.168.0.2). My LVS server is 192.168.0.254 on eth0 and 10.11.1.67 on
eth0:1.
I configure the LVS server with ls_nat.conf, and ./configure ls_nat.conf
to have the rc.lvs_nat. When I start rc.lvs_nat all is ok. ipvsadm give
the right table.
The LVS server can access to the 2 web server on port 80. My problem is
when I trie to access the web server using LVS (telnet 10.11.1.67 80). I
have no connection. When I execute netstat -taon, I have not the line :
0.0.0.0:80 LISTEN.
Is someone can help me ?
Regards
Matthieu MARC
matthieu.marc@xxxxxxxxxxx
|
