|
Thanks Nael,
really appreciate it !!!! What do you actually meant by making all IP's to local
host. My machines have an IP already, which is 169.238.*.*
however i don't know if i have to create incoming and outgoing IP ( i mean from
both eth0 and eth1)
or since they're all on the local network, only eth0 will be sufficient.
Thanks again !!!!
George
Nael Mohammad wrote:
> Yes, its possible to create a Linux cluster behind the firewall on your
> internal LAN, just specify all IP address to a local host or 192.168.1.xxx.
>
> And in the case of other packages, the packages you have should be
> sufficient. Unless you have more that you want to do, but in the case of a
> LVS. That's all you would need. If I'm wrong, can the community correct me.
>
> Nael Mohammad
> Neomar, Inc.
> nmohammad@xxxxxxxxxx
> 415-403-7300 x314 (Work)
> 415-793-0609 (Mobile)
> "When Wireless Means Business"
>
> CONFIDENTIALITY NOTICE: This e-mail may contain confidential information
> that is legally privileged. Do not read this e-mail if you are not the
> intended recipient.
> This e-mail transmission, and any documents, files or previous e-mail
> messages attached to it may contain confidential information that is legally
> privileged. If you are not the intended recipient, or a person responsible
> for delivering it to the intended recipient, you are hereby notified that
> any disclosure, copying, distribution or use of any of the information
> contained in or attached to this transmission is STRICTLY PROHIBITED. If you
> have received this transmission in error, please immediately notify us by
> reply e-mail or by telephone at (415) 403-7300, and destroy the original
> transmission and its attachments without reading or saving in any manner.
> Thank you.
>
> -----Original Message-----
> From: George G. Georgiev [mailto:georgiev@xxxxxxx]
> Sent: Tuesday, August 14, 2001 10:37 AM
> To: lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Subject: Starting LVS
>
> Hey all,
>
> I have 4 linux servers running Red Hat 7.1 and i want to create 2
> virtual and 2 real server setup.
> Now on 3 of the machines i have ipvsadm and Piranha installed but not
> configured. Also I am operating only on an internal company network.
>
> My questions are if first of all it is possible to create LVS only on
> internal network, or i "need" the real I-net also, plus do i need any
> other packages besides Piranha and ipvsadm in order to be successful !
>
> Thank you in advance !!!
>
> Regards,
>
> George G. Georgiev
> Co-op Systems Engineer
> SGI, NY
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
|
