|
Hi,
use debian instead of fedora redhat. things become quite easy and u
always get a ready suport . there are a good number of lvs guys out
there in irc channel # debian.
to get started:
a. choose the correct kernel. (2.4.27 supports it). i used debian
sarge where in the modules are already there and i just did a insmod.
b. configure the network cards. i have done with 2 network cards . for
lvs-nat, iptables could be used see netfilter.org, for iptables howto.
if u are testing with private ip's for simplicity make the ip's
different for example 192.168.0.1 for the vip and 192.168.10.1 and
192.168.10.2 for the real servers. in the .10 series use one for the
second card. masq the
second card.
c. just create the service and the real servers. ipcsadm commands see
lvs-nat documentation. (not the howto
d. test it.
it will work just as fine.
after ur first lvs is working fine, go for mon, heartbeat, ldirectord
etc. but i suggest that atleast test ur first working system first.
if u can't make it , let us know, i will send u the sequence of steps.
we have set up a lvs server with a cut down debian sarge system of 100
MB only. for lvs-nat it's easy for the other two u have to do some
more configurations.
On 7/11/05, Vijay K <vijay_k@xxxxxxxxxxxxx> wrote:
> Hello all,
> I am planning to set up load balancing.
> I need help from u people since I am just about to start it.
> I have fedora core 2 on my machines.
> 1)To start with I plan to have 1 directot and 2 real servers. Can I do like
> this?
> 2)ultramonkey has a package(2.0.1) for fedora core 1 and it requires a
> kernal rebuild.And ultramonkey 3.0 doesnt have a package for fedora.I am
> planning to use ultramonkey package supplied for fedora core 1.Can i do
> this?If i do this should i go in for a kernal rebulid like i am using fedora
> core 1 even though i am using fedoracore 2
> 3)Also all teh packages seem to be for directot machine ..should resl
> servers be loaded with something.If so can u please direct me to that
> (I have configured ha with two machines successfully..now i awant a load
> balance setp)
> Thanks in advance
> I look forward to hearing from u in this regard
> Regds
> Vijay
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
--
Imagination is more important than knowledge
|
