Re: just added a new real server, getting a really large number of InActConn

[Randy Paries <rtparies@xxxxxxxxx>]

Thanks for that,

so here is some more info

i must be missing something simple.

The default gw is pointing to the correct one.

So as I compare a working real server with the new one, the one thing
i notice is missing on lovejoy is the 127.0.0.0.

Flanders:(working one)
 route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
66.208.187.128  *               255.255.255.128 U     0      0        0 eth1
192.168.1.0     *               255.255.255.0   U     0      0        0 eth2
192.168.0.0     *               255.255.255.0   U     0      0        0 eth0
169.254.0.0     *               255.255.0.0     U     0      0        0 eth2
127.0.0.0       *               255.0.0.0       U     0      0        0 lo
default         rtr.coleresourc 0.0.0.0         UG    0      0        0 eth1

LoveJoy:(new one)
 route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
66.208.187.128  *               255.255.255.128 U     0      0        0 eth0
192.168.1.0     *               255.255.255.0   U     0      0        0 eth2
192.168.0.0     *               255.255.255.0   U     0      0        0 eth1
169.254.0.0     *               255.255.0.0     U     0      0        0 eth2
default         rtr.coleresourc 0.0.0.0         UG    0      0        0 eth0


Also, i am not sure if this is just a difference on OS's
but when i do a ifconfig
Flanders::(working)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:214434 errors:0 dropped:0 overruns:0 frame:0
          TX packets:214434 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:230627785 (219.9 Mb)  TX bytes:230627785 (219.9 Mb)

lo:0      Link encap:Local Loopback
          inet addr:66.208.187.10  Mask:255.255.255.255
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3655521 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6472066 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:815357750 (777.5 Mb)  TX bytes:1275383504 (1216.3 Mb)

Lovejoy::(working)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:492949 errors:0 dropped:0 overruns:0 frame:0
          TX packets:492949 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:636034629 (606.5 MiB)  TX bytes:636034629 (606.5 MiB)

lo:0      Link encap:Local Loopback
          inet addr:66.208.187.10  Mask:255.255.255.255
          UP LOOPBACK RUNNING  MTU:16436  Metric:1

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)







On 2/7/06, Joseph Mack NA3T <jmack@xxxxxxxx> wrote:
> On Tue, 7 Feb 2006, Randy Paries wrote:
>
> > can anyone give me a suggestion of where to start looking
>
> inactconns usually mean the default gw for the realserver
> isn't set to the router
>
> Joe
>
> --
> Joseph Mack NA3T EME(B,D), FM05lw North Carolina
> jmack (at) wm7d (dot) net - azimuthal equidistant map
> generator at http://www.wm7d.net/azproj.shtml
> Homepage http://www.austintek.com/ It's GNU/Linux!
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users@xxxxxxxxxxxxxxxxxxxxxx
> Send requests to lvs-users-request@xxxxxxxxxxxxxxxxxxxxxx
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>