Re: all clients disconnect on failover

[Joseph Mack NA3T <jmack@xxxxxxxx>]

On Wed, 11 Oct 2006, Brett Elliott wrote:

> On 10/11/06, Joseph Mack NA3T <jmack@xxxxxxxx> wrote:
> > On Wed, 11 Oct 2006, Brett Elliott wrote:
> >
> > > On 10/11/06, Sebastian Vieira <sebvieira@xxxxxxxxx> wrote:
> >
> > > If you cannot change the realservers, then you cannot use LVS.
> >
> > not quite. you must use LVS-NAT.
> >
> > Joe
> With LVS NAT you must change the realserver by changing the gateway to
> be that of the director, and to the original author of this thread,
> that is not acceptable.
ah excuse me. Wasn't paying attention.

I don't suppose he can have the director advertise the IP of 
the default gw (proxy-arp?). This would require plugging the 
ethernet cables from the realservers into the back of the 
director.
Joe

--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!