|
1.) I am getting the error:
warning: ./configure has not been tested with kernel version 2.4.18
parse_hostname: error: gethostbyname failure - Couldn't lookup hostname lvs
: No such file or directory
whenever I run the configure script that comes with configure-lvs_0.9.2
2.) After getting the above error, I started having trouble with my
interfaces. This does not mean they are related in any way, but I though
I'd throw it out there:
I have configured my eth1 device with 7 ip addresses 10.80.1.5, *.11, *.20,
*.30, *.40, *.41, *.50 where 11, 20, 30, 40 and 50 are intended to be my
LVS ips and 5 is my nameserver and 41 is my apache->weblogic proxy.
After attempting to configure LVS, none of my interface aliases will come
up except ifconfig-eth1 (10.80.1.5), ifconfig-eth1:1 (10.80.1.11) and
eth1:2 (10.80.1.20). I simply get the error "SIOCSIFFLAGS: Cannot assign
requested address"
This started hapening after I moved the ipaddresses 10.80.1.5 and
10.80.1.41 over to eth1 (they were formally ifconfig-eth0 and
ifconfig-eth0:1 respectively) and after I started attempting to configure
ipvs. I was forced to move all my addresses to the same interface as the
virtual servers after discovering that my host only had a port for one of
my NICs. I am running the lvs_dr.conf.one_NIC_one_network configure script
(with my own network scheme of course).
Matt Gregory
Web Developer
CTI, Inc.
cell: 678-458-6513
ioem: matt.gregory@xxxxxxxxx *see key block below
ooem: matthew.gregory@xxxxxxxxxxxx
--
NOTICE: This e-mail message and all attachments transmitted with it may
contain legally privileged and confidential information intended solely
for the use of the addressee. If the reader of this message is not the
intended recipient, you are hereby notified that any reading,
dissemination, distribution, copying, or other use of this message or
its attachments, hyperlinks, or any other files of any kind is strictly
prohibited. If you have received this message in error, please notify
the sender immediately by telephone (865-218-2000) or by a reply to this
electronic mail message and delete this message and all copies and
backups thereof.
|
