|
At the moment I have a private ADSL connection that runs via PPPoe with 2
subnets of 8 IP addresses.
IOW - my 2 subnets are 216.126.67.120/29 and 216.126.66.192/29
At the current time I'm trying to run 1 machine per address directly.
In the future I hope to grow the system via the use of "front ends" so as
to have dozens of low-cost processors - each one dedicated to one domain.
With the cost of processors dropping exponentially, I can obtain a secure
system - with a separate processor per user.
I know how to do port redirection. I can even even route inbound addresses
to local addresses.
*BUT* !!!
What I'm trying to do is have an inbound address route to the internal
address!
IOW: 216.126.67.123 goes to a machine that responds to 216.126.67.123
and the machine with address 216.126.67.123 presents itself to the rest of
the world as 216.126.67.123!
However, while I can build the necessary routing from physical addresses,
but how do I get there from here?
Basically, I need to be able to go from the PPPoe link to independent
addresses!
If I were running with a normal link, I wouldn't have this problem!
In the future. I'll have multiple gateways, each splitting a
single physical address to provide an LVS and - hopefully - but first
things first and I can't even get there from here!!
HELP!!!!!!
------------------<<<<>>>>-------------------
Alec Grynspan - Chief Tech Support
Phoenix Internet Services Group
------------------<<<<>>>>-------------------
|
